Loading ...
Loading ...
Loading ...
"Pyrolytic self-cleaning" cleaning function en
21
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶ Never hang combustible objects, e.g. tea towels, on
the door handle.
▶ Leave the front of the appliance clear.
▶ Keep children at a safe distance.
If the door seal is damaged, a large amount of heat is
generated around the door.
▶ Do not scrub or remove the seal.
▶ Never operate the appliance if the seal is damaged
or missing.
1.
Remove accessories and cookware from the cook-
ing compartment.
You can also clean the shelf supports.
2.
Remove coarse dirt from the cooking compartment
and from the shelf supports.
3.
Use a detergent solution and a soft cloth to clean
the surfaces at the edges of the cooking compart-
ment around the door seal.
Do not remove or scrub the door seal.
Use oven cleaner to remove stubborn dirt from the
inner door pane.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty except for
the shelf supports.
17.2 Setting the "Pyrolytic self-cleaning"
cleaning function
WARNING‒Risk of harm to health!
The cleaning function heats up the cooking compart-
ment to a very high temperature so that food left over
from roasting, grilling and baking will burn off. This pro-
cess releases vapours, which can irritate mucous mem-
branes.
▶ Keep the kitchen well ventilated while the cleaning
function is running.
▶ Do not remain in the room for long periods.
▶ Keep children and pets away.
WARNING‒Risk of burns!
The cooking compartment gets very hot when the
cleaning function is in progress.
▶ Never open the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶ Never touch the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
Note:The oven light does not light up while the clean-
ing function is running.
Requirement:→"Preparing the appliance for the
cleaning function", Page20
1.
Press "Cleaning".
2.
Press "Pyrolytic self-cleaning"
.
3.
Press "Level" to set the cleaning setting.
Cleaning set-
ting
Cleaning
level
Duration in hours
1 Low Approx. 2:15
2 High Approx. 2:30
Select the higher cleaning setting if the cooking
compartment is particularly dirty or has not been
cleaned for a while.
You cannot change the duration of the cleaning
function.
Once the cleaning function is in progress, you can-
not change the cleaning setting.
a The duration of the cleaning setting will appear on
the display.
4.
Press
to start the cleaning function.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
5.
Press "OK" to confirm the notification.
a The cleaning function starts. The duration counts
down on the display.
a For your safety, the appliance door locks the cook-
ing compartment.
appears on the display.
a Once the cleaning function has run through to the
end, an audible signal sounds.
6.
After using the cleaning function, prepare the appli-
ance for operation.
→"Preparing the appliance after the cleaning func-
tion", Page21
The appliance door will remain locked until the ap-
pliance has cooled down sufficiently and
has
gone out.
17.3 Cancelling the cleaning function
Note:You can no longer stop or change the cleaning
function once it has started.
▶
To cancel the cleaning function, press
to switch
the appliance off.
17.4 Preparing the appliance after the
cleaning function
1.
Allow the appliance to cool down.
2.
Wipe off any ash that has been left behind in the
cooking compartment, on the shelf supports and
around the appliance door with a damp cloth.
3.
Remove white residues with lemon juice.
Note:White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Note:While the cleaning function is running, the frame
on the inside of the appliance door or other parts of
the door that are made of stainless steel become dis-
coloured. This discolouration does not compromise the
functionality of the appliance. The discolouration can
be removed using a stainless steel cleaner.
Loading ...
Loading ...
Loading ...