Loading ...
Loading ...
Loading ...
Additional Tests
RESETTING THE OIL MAINTENANCE LIGHT
33
EVAP Test
The EVAP Test function lets you initiate a leak test for the vehicle's
EVAP system.
The Scan Tool does not perform the leak test, but signals to
vehicle's on-board computer to initiate the test. The vehicle
manufacturer determines the criteria and method for stopping the
test once it has been started. Refer to the vehicle's service repair
manual to determine the procedures necessary to stop the test.
1. From the System Test menu, select EVAP Test, then press ENTER
.
2. A "One moment please..." message
displays.
3. When the EVAP leak test has been
initiated by the vehicle's on-board
computer, a confirmation message
displays. Select Back, then press
ENTER
to return to the System Test
menu; or, press M to return to the Main
Menu.
Some vehicle manufacturers do not allow scan tools or other
external devices to control vehicle systems. If the EVAP Test is
not supported by the vehicle under test, an advisory message
displays. Press the M button to return to the Main Menu.
RESETTING THE OIL MAINTENANCE
LIGHT
1. While linked to the vehicle, press M.
The Main Menu displays.
2. Select Service Reset, then press
ENTER
to continue.
The Service Reset screen displays.
3. Select Oil Reset, then press ENTER
.
The Oil Reset screen displays.
If the vehicle under test is equipped
with a navigation system, select Yes,
then press ENTER
to continue.
If the vehicle under test is not
equipped with a navigation system,
select No, then press ENTER
to
continue.
Loading ...
Loading ...
Loading ...