Loading ...
Loading ...
Loading ...
Additional Tests
SYSTEM TEST MENU
30
In addition to retrieving Diagnostic Trouble Codes (DTCs), you can use
the Scan Tool to perform additional diagnostic tests, to view diagnostic
and vehicle information stored in your vehicle's on-board computer, and
to configure the Scan Tool for your particular needs. Additional tests and
related functions are accessed through the Main Menu. The following
functions are available:
System Tests – Displays the System
Test menu, which lets your retrieve and
view results for the O2 Sensor Test and
OBD Monitor Test, and lets you initiate
a test of the vehicle’s EVAP system.
Service Reset – Lets you reset the Oil
Maintenance Light and reset the battery
monitor system after battery replacement.
Service Check – Lets you view the current engine oil level and oil
life remaining.
Hybrid/EV Battery Test, Battery/Alternator Test – Performs a check
of the vehicle’s battery and alternator system (or hybrid/EV battery
system) to ensure the system is operating within acceptable limits.
Drive Cycle Procedure – Lets you view trip cycle procedures for a
selected vehicle monitor.
DLC Locator – Lets you find the location of the Data Link
Connector (DLC) for a specified vehicle.
Vehicle Information – Displays the Vehicle Info menu, which lets you
retrieve and view reference information for the vehicle under test.
Firmware Version – Displays the Scan Tool’s firmware version.
Tool Library – Displays the Tool Library menu, which provides
access to OBD1 and OBD2 DTC libraries and to definitions for
Monitor icons and LED indications.
Tool Settings – Displays the Tool Settings menu, which lets you
make several adjustments and settings to configure the Scan Tool
to your particular needs.
The System Tests and Vehicle Information options are
shown only when the Scan Tool is in Global OBD2 mode.
SYSTEM TEST MENU
Additional tests are accessed through the Mode Test menu. The
following functions are available:
O2 Sensor Test - Retrieves and displays O2 sensor monitor test
results from your vehicle's on-board computer.
OBD Monitor Test - Retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored.
EVAP Test - Performs a leak test for the vehicle's EVAP system.
1. While linked to the vehicle, press M.
Loading ...
Loading ...
Loading ...