Loading ...
Loading ...
Loading ...
Live Data Mode
CUSTOMIZING LIVE DATA (PIDs)
24
If communication with the vehicle is
lost while viewing Live Data, a
Communication Lost" message
shows on the Scan Tool's display.
5. Press and release ENTER
to view
the currently selected PID in “graph” mode.
Press and release ENTER
again to
return to the PID list.
You can display a maximum of two
PIDs in "graph" mode at any given
time.
With two PIDs shown in "graph"
mode, press and hold LD to
superimpose one graph on the other.
Release LD to separate the graphs.
6. Press and hold ENTER
to view the
“expanded” definition for the currently
selected PID. Release ENTER
to
return to the PID list.
7. If you experience vehicle problems,
view and/or compare the Live Data (PID)
information displayed on the Scan Tool
to specifications in the vehicle's repair
manual.
If desired, you can "customize" the Live Data display to show only
those PIDs you are interested in viewing. See Customizing Live
Data (PIDs) below for details.
CUSTOMIZING LIVE DATA (PIDs)
You can customize the Live Data display by placing the Scan Tool in
"Custom Live Data" mode and selecting only the PIDs that you wish to
display.
1. With the Scan Tool in Live Data mode
(see VIEWING LIVE DATA on page 23),
press and hold LD until the Live Data
Menu displays, then release.
2. Select Custom Live Data, then press
the ENTER
button.
If the Scan Tool fails to establish communication with the vehicle,
a “Communication Error” message displays.
- Ensure your vehicle is OBD2 compliant.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press POWER/LINK
to continue.
Loading ...
Loading ...
Loading ...