Loading ...
Loading ...
Loading ...
Live Data Mode
LIVE DATA PLAYBACK
29
When you select Yes from the Record Live Data confirmation
screen, the Scan Tool enters the "Live Data Playback" mode,
and the Playback Live Data menu displays.
3. Select Continuous Playback or Frame
by Frame, as desired, then press ENTER
.
The display shows the recorded
Live Data, beginning with the
"trigger" frame.
Only a limited amount of PID data
can be displayed on the screen at
one time. If additional PID data is available, a small arrow is
shown on the display. Press UP
and DOWN , as
necessary, to view all available PID data.
When viewing recorded Live Data, look for any irregularities in any
of the PID values/signal information (LTFT %, RPM, MAP, TEMP,
etc.). If any PIDs are not within specification, or irregularities are
detected, follow the procedures in the vehicle's service repair
manual to perform additional troubleshooting and repair.
4. When you select Continuous
Playback, the Scan Tool plays
recorded data at a rate of one frame /
15 seconds. When playback is finished,
a Playback Complete message displays.
To play the data back again, select
Continuous Playback or Frame by
Frame, as desired, then press
ENTER
.
To exit Live Data Playback mode and return to Live Data mode,
select Exit Playback, then press ENTER
.
5. When Frame by Frame is selected, you must scroll the individual
frames manually.
When you have viewed all PID information for the current frame of
Live Data, select Next Frame or Previous Frame, as desired,
then press ENTER
.
To exit Live Data Playback mode, select Exit Playback, then
press ENTER
.
If there is no Live Data currently stored in the Scan Tool's
memory, an advisory message shows on the display. Press LD
to exit the "Live Data Playback" mode.
Loading ...
Loading ...
Loading ...