Loading ...
Loading ...
Loading ...
10
Programming the Electronic Controller
CONTROLLER SETTINGS REQUIRED
upon installation, and after an extended power outage.
When the power supply is plugged into the electrical
outlet, a model code (HIF10) and a test number
(example: J3.8), are briefly shown in the display.
Then the words “PRESENT TIME” appear and 12:00
PM begins to flash.
A. SET PRESENT TIME OF DAY
If the words “PRESENT TIME" do not show in the dis-
play, press the SELECT button several times until
they do.
FIG. 12
FIG. 13
1. Press the r UP or s DOWN buttons to set the
present time. Up moves the display ahead; down
sets the time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down
for fast advance.
2. When the correct time is displayed, press the
SELECT button, and the display will change to
show the next setup screen.
FIG. 11
U
P button
DOWN
button
D
isplay
TOUCH/HOLD
button
SELECT
button
Loading ...
Loading ...
Loading ...