Loading ...
Loading ...
Loading ...
Page 18
MAINTENANCE
TROUBLESHOOTING
The tool may be cleaned most effectively
with compressed dry air. Always wear
safety goggles when cleaning tools with
compressed air. Ventilation openings and
switch selectors must be kept clean and free
of foreign matter. Do not attempt to clean by
inserting pointed objects through openings.
Certain cleaning agents and solvents
damage plastic parts. Some of these are:
gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household
detergents that contain ammonia.
STORAGE
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
PROBLEM POSSIBLE CAUSE SOLUTION
Tool will not start. Or tool
suddenly stops during the
cut.
Battery pack charge is
depleted.
Charge the battery pack.
Battery pack is not
installed properly.
Conrm that the battery
is properly inserted and
secured to the tool.
The tool is overheated. Allow the tool to cool down.
The battery is overheated.
Allow the battery to cool
down.
The tool is overloaded.
Restart the tool and do not
force the tool. Allow the
blade speed to do the job.
The blade binds, jams, or
bums the wood.
The blade is dull. Replace the blade.
An improper blade is
being used.
Choose the right blade for
your operation.
The blade is warped. Replace the blade.
The saw vibrates or shakes.
The blade is damaged. Replace the blade.
The blade is loose.
Remove the blade and
reinstall it.
Loading ...
Loading ...
Loading ...