Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE WASHER Icont.}
7. Attach the U-shaped hose guide to the end of the
drain hose. Place the hose in a laundrg tub or
standpipe and secure it with the cable tie provided in
the enclosure package.
NOTE: Placingthe drain hose too far down the drain pipe
can cause a siphoning action. No more than 7 inches of
hose should be in the drain pipe.There must be an air
gap around the drain hose.A snug fit can also cause a
siphoning action.
CableTie/ CableTiej_
1
\\
\
\
CableTie
8. Plug the power cord into a grounded outlet.
NOTE:Check to be sure the power is off at the circuit
breaker/fuse box before plugging the power cord into
an outlet.
.
10.
11.
12.
13.
14.
Turn on the power at the circuit breaker/fuse box.
Read the rest of this Owner's Manual. It contains
valuable and helpful information that will save gou
time and moneLI.
Before starting the washer, check to make sure:
[] Main power isturned on.
[] The washer is plugged in.
[] The water faucets are turned on.
[] The unit is level and all four leveling legs are firmlg
on the floor.
[] Theshipping support hardware is removed
and saved.
[] The drain hose is properlg tied up.
[] There are no leaksat the faucet, drain line
or washer.
Run the washer through a complete CLICle.
Check for water leaks and proper operation.
If LlOUrwasher does not operate, please review
the Before YouCallFor Servicesection before
calling for service.
Place these instructions in a location near the washer
for future reference.
REPLACEMENT PARTS
If replacement parts are needed for LlOUrwasher,theLI
can be ordered in the United States bLIvisiting our
Website at GEAppliances.com or bg calling
800.GE.CARES.
2O
Loading ...
Loading ...
Loading ...