Loading ...
Loading ...
Loading ...
Installation Instructions
UNPACKING THE WASHER
WARN ING: Recycleor destroy the carton
and plastic bags after the washer is unpacked. Make
materials inaccessibleto children. Children might use
them for play. Cartons covered with rugs, bedspreads
or plastic sheets can become airtight chambers causing
suffocation.
1. Cut and remove the top and bottom packaging straps.
2. While it is in the carton, carefully lay the washer on its
side.DO NOTlay the washer on its front or back.
3. Turn down the bottom flaps-remove all base packaging,
including the cardboard, styrofoam bose and styrofoam
tub support (insertedin center of base).
NOTE:If you ere installing e pedestal, proceed to
the installation instructions that come with the pedestel.
4. Carefully return the washer to an upright position and
remove the carton.
5. Carefully move the washer to within 4 feet (122 cm)
of the final location.
6. Remove the following from the back side of the washer:
/4bolts
/4plastic spacers (including rubber grommets)
/4power cord retainers
NOTE:Failureto remove the shipping braces can cause
the washer to become severely unbalanced.
Suve all bolts for future use.
NOTE:If you must transport the washer at a later date,
you must reinstall the shipping support hardware to prevent
shipping damage. Keepthe hardware in the plastic bag
provided.
In cuseyou misplace your shipping bolts, replacements
are uvuiluble ut udditionul cost. They can be ordered in the
United Stutes by visiting our website ut GEAppliunces,com
or culling 800,GE.CARES,Order kit #WH49×10039,
17
Loading ...
Loading ...
Loading ...