Loading ...
Loading ...
Loading ...
Maintenance & Tips
8
Your ice maker is designed for year-round use with only minimal cleaning and maintenance.
When you first receive it, wipe the outside with a mild detergent and warm water, then wipe dry with
a dry cloth. Do this periodically to keep your ice maker looking new.
To prevent damage to the finish, do not use:
Gasoline, benzine, thinner, or other similar solvents.
Abrasive cleaners.
MAINTENANCE
TIPS & SUGGESTIONS
Stop the ice-making cycle by pressing the POWER button. the green LED light will go out, indicating
the ice maker is off. Unplug the Ice Maker from the wall outlet and allow the unit to warm up to room
temperature.
If the Water Tray is not in the vertical position behind the Evaporator Fingers, gently push the Water
Tray back so that all water drains into the Water Reservoir.
Open the Drain Plug to drain out excess water.
Remove the Ice Basket.
Remove the Water Tube Screen and rinse under running water.
Clean the Ice Maker interior with a soft cloth dampened in warm water and vinegar.Rinse with a
clean, damp cloth.
Replace the Drain Plug and the Water Tube Screen. Wash the Ice Basket and Ice Scoop in warm
soapy water. Rinse and dry.
Clean the exterior of the Ice Maker with a soft, damp cloth. Use a mild dishwashing soap if neces-
sary.
Do not clean the Evaporator Fingers.
Locate your ice maker in the coolest area of the room, away from heat producing appliances or
heating ducts and out of the direct sunlight.
Make sure that the appliance is sufficiently ventilated, with adequate air circulation behind it.
Note:
Loading ...
Loading ...
Loading ...