Loading ...
Loading ...
Loading ...
Operation & Installation
7
The ice making cycle will last approximately 8-13 minutes depending on the ice size that is selected.
The ice making cycle starts with water being pumped into the Water Tray situated below the
Evaporator Fingers. Over the next 8-13 minutes ice forms on the Evaporator Fingers. Once this has
completed, the Ice Tray will tilt backwards and the remaining water in the Ice Tray is drained back
into the Water Reservoir. The ice cubes are then dropped from the Evaporator Fingers and pushed
forward into the Ice Basket by the Ice Shovel. The Ice Tray will automatically move back into position
under the Evaporator Fingers and start the next cycle.
The ICE FULL LED light will light up when the ice basket is full and the Ice Maker will stop the ice
making cycle automatically. Gently remove the ice from the Ice Basket with the Ice Scoop. Once the
Ice Basket has been emptied and the Cover closed, the Ice Maker will restart its ice making function
automatically.
The ADD WATER LED light will light up when there is no more water in the Water Reservoir, and the
ice making cycle will stop automatically. Press the Power Button once (the Power Button will flash
every 5 seconds), remove the ice basket, and add water to the Water Reservoir.
If the room temperature is below 60° F (15.6° C), select the SMALL ice cube size to
prevent the ice cubes from sticking together
Press and hold the SELECT button for five seconds to run 8 continuous cycles, even when the
ICE FULL indicator is on.
Do not fill above the MAX water level mark at the back of the Water Reservoir. Replace
the ice basket, and close the Cover.
Direct sunlight or reflected sunlight may cause the infrared sensor to malfunction. If the unit does not
stop making ice cubes even when full, move the ice maker to a darker location.
You must change the water in the tank at least every 24 hours to ensure a reasonable hygene level
and avoid bad smelling ice.
Wait 3 minutes then press the Power Button to restart the ice making function.
When you have finished making ice, transfer the ice to a freezer.
The ice will last in the Ice Maker for up to a 18 hour period, depending on the ambiant temperature.
Stop the ice making cycle by pressing the Power Button. Unplug the unit from the wall outlet.
Open the Cover and allow the Ice Maker to reach room temperature and follow the directions in the
Care and Cleaning section.
Loading ...
Loading ...
Loading ...