Loading ...
Loading ...
Loading ...
-8-
VI. CONTROL BASICS
IMPORTANT NOTE: While accessing the Controller Menu,
two line, small font text messages will be displayed. In
this document two line messages are denoted as follows,
“TopLine, BottomLine”.
For example, the text displayed in image below is denoted
as follows, “Submenu 1/5, Sensor Readings”.
VI. b - CHANGE THE SETPOINT
The setpoint of the unit can be changed by following the
steps below:
1. While the cabinet temperature is displayed (home screen),
press the Enter / Modify Key(↵). “SubMenu 1/5, Sensor
Readings” will display.
2. Push the Plus(+) or Minus(-) Key to navigate the submenu
system until, “SubMenu 2/5, Settings” displays.
3. Push the Enter/Modify Key(↵), “Enter Password, 0” will
display.
4. Push Enter/Modify Key(↵) two times, to view the setpoint. If
the unit has a setpoint of 36,”TempCabSP, 36” will display.
5. Push the Enter/Modify Key(↵), the control will now enter
edit mode.
6. Push the Plus(+) or Minus(-) Key to change the setpoint to
the desired number.
7. Push Enter/Modify Key(↵) once to register the new value.
8. Push Enter/Modify Key(↵) again to conrm the change.
The new setpoint will now display.
9. Push the Escape/Back/Cancel Key(x) twice to exit the
submenu system. The cabinet temperature will display
Fig. 14
Control Displaying Two Line Message
36.3
Submenu 1/5
Sensor Readings
VI. a - CONTROL DISPLAY
Your new Traulsen Refrigerator, Freezer or Hot Food cabinet
is equipped with a state-of-the-art electronic control, which
precisely regulates operation and provides alarms when
problems occur. It is supplied from the factory completely
ready for use and requires no adjustment (except Hot Food
units which are set in the “OFF” position).
On the Left Side of the display there are four icons that reflect
the status of the compressor, fans, defrost and alarms. At
the center of the display is a Text Display that shows the
Cabinet Temperature. It will also be used to access the
Control Settings. Below the display are four tactile buttons
used to access the control menu system.
Status Symbols
STATUS SYMBOL DESCRIPTION
Compressor Status / Heater
Status
Fan Status
Defrost Status
Alarm/Door Open
Table 1
Push Button Symbols
BUTTON SYMBOL DESCRIPTION
Escape / Back / Cancel Key
Minus (-) / Previous Key
Plus (+) / Next Key
Enter / Modify Key
Table 2
Fig. 13
Control Displaying Cabinet Temperature
Loading ...
Loading ...
Loading ...