Loading ...
Loading ...
Loading ...
-9-
VI. c - INITIATE A DEFROST
All Traulsen units are setup to defrost automatically. If
necessary, the user may manually initiate a defrost:
1. While the cabinet temperature is displayed (home
screen), press the Enter/Modify Key(↵). “SubMenu 1/5,
Sensor Readings” will display.
2. Push the Plus(+) or Minus(-) Key to navigate the
submenu system until, “SubMenu 3/5, Start Defrost”
displays.
3. Push the Enter/Modify Key(↵) twice to start defrosting.
Display will return to the home screen, and the defrost
icon will light up. The unit will terminate defrost
automatically without user intervention.
VIII. d - CHANGE TIME BETWEEN DEFROST CYCLES
1. While the cabinet temperature is displayed (home screen),
press the Enter/Modify Key(↵). “SubMenu 1/5, Sensor
Readings” will display.
2. Push the Plus(+) or Minus(-) Key to navigate the submenu
system until, “SubMenu 2/5, Settings” displays.
3. Push the Enter/Modify Key(↵), “Enter Password, 0” will
display.
4. Push the Plus(+) or Minus(-) Key to set the number to 5,
then push the Enter/Modify Key(↵).
5. Push Plus(+) or Minus(-) Key to set the second number
to 5, then push the Enter/Modify Key(↵).
6. Push the Plus(+) or Minus(-) Key to set the third number
to 5, then push the Enter/Modify Key(↵) (The password
is 555).
7. Push the Enter/Modify Key(↵) again, to enter the Settings
Menu. “TempCabSP” will display.
8. Push the Plus(+) or Minus(-) Key to navigate the Settings
submenu system until, “DefrostInterval, 08:00:00” displays.
9. Push the Enter/Modify Key(↵), the control will now enter
edit mode. The “hh” (hour) digits will start blinking.
10. Push the Plus(+) or Minus(-) Key to adjust the “hh” digit
and push the Enter/Modify Key(↵) once to register the
new value.
11. The “mm” (minutes) digits will now start blinking. Push the
Plus(+) or Minus(-) Key to adjust the “mm” digit and push
the Enter/Modify Key(↵) once to register the new value.
12. The “ss” (seconds) digits will now start blinking. Push the
Plus(+) or Minus(-) Key to adjust the “ss” digit and push
the Enter/Modify Key(↵) once to register the new value.
13. Push the Enter/Modify Key(↵) again to conrm the change.
The new setting will now dislpay.
14. Push the Escape/Back/Cancel Key(x) twice to exit the
submenu system.
VI. e - ACCESS POWER FAILURE DATA
1. While the cabinet temperature is displayed (home
screen), press the Enter/Modify Key(↵). “SubMenu 1/5,
Sensor Readings” will display.
2. Push the Plus(+) or Minus(-) Key to navigate the
submenu system until, “SubMenu 4/5, Alarms” displays.
3. Push the Enter/Modify Key(↵) to navigate the alarm
menu board.
4. Push the Plus(+) or Minus(-) Key to navigate to parameter
“Timeofpowerdown”. Here the user will see the time
duration the unit was powered down.
5. Push the Plus(+) or Minus(-) Key to navigate to
parameter TempCabAtPowerUp”. Here the user will
view the temperature recorded at the moment power
was resgtored to the unit. This will be the warmest
temperature during a power loss event.
6. To clear the alarm, push the Enter/Modify Key(↵) again
and use the Plus(+) or Minus(-) Key to navigate to
parameter “PowerFailAlarm”. The parameter will display
“Alarm”. Push Enter/Modify Key(↵) twice to clear the
alarm so the parameter displays “Normal”.
7. Push the Escape/Back/Cancel Key(x) twice to exit the
submenu system.
NOTE: You can use the Plus(+) or Minus(-) Key in a similar
fashion to review the status of other alarms while on step
5. For a list of alarms and other paramenters please see
section “Vi. h”.
VI. f - TURN UNIT OFF/ON (Hot Food Cabinets Only)
1. To turn OFF the Hot Food unit, press the Escape/Back/
Cancel Key(x) until nothing is displayed on the screen.
Push any key to turn the unit back ON.
VI. CONTROL BASICS (continued)
Loading ...
Loading ...
Loading ...