Loading ...
Loading ...
Loading ...
12
ASSEMBLY
STEP 3
3A. Removing The Hardware From The Front Post – Remove four Bolts (23) and four
Curve Washers (25) from the Front Main Frame (5).
3B. Slide the Front Handlebar Post Cover (74) up and pull the Tension Cable (40) through
the bottom hole. See Figure A.
3C. Insert the Tension Cable (40) into the bottom of the Front Handlebar Post (6) and pull it
out through the square hole located on the Front Handlebar Post (6). See Figure B.
!
6 mm Allen Wrench
Tool:
Fig. A
Fig. B
Loading ...
Loading ...
Loading ...