Loading ...
Loading ...
Loading ...
10
ASSEMBLY
Step 1
1A. Removing the Hardware from the Rear Main Frame - Remove two Bolts (49), four Bolts
(23), and six Washers (24) from the Rear Main Frame (3). Remove bolts with the 6mm Allen
Wrench provided.
1B. Installing the Rear Main Frame - Connect the Middle Section Hand Pulse Sensor Wires
(55) from the Rear Main Frame (3) to the Extension Hand Pulse Sensor Wires (65) from the
Front Main Frame (5). Attach the Rear Main Frame (3) into the Front Main Frame (5) with two
Bolts (49), four Bolts (23), and six Washers (24) that were removed. Tighten bolts with the
6mm Allen Wrench provided.
1C. Adjust the seat position and insert the Knob (81) in the clockwise direction to tighten.
6mm Allen Wrench
Tool:
Loading ...
Loading ...
Loading ...