Napoleon PRO825RSBIPSS-3-NL

Manual - Page 99

For PRO825RSBIPSS-3-NL.

PDF File Manual, 141 pages, Read Online | Download pdf file

PRO825RSBIPSS-3-NL photo
Loading ...
Loading ...
Loading ...
18
EN
www.napoleon.com
N415-0537CE-GB-DE JUL 13.20
Problem Possible Causes Soluon



abruptly makes a loud


type sound and grows dim.)

drippings and build-up. Ports are clogged.

(too much grill surface covered by griddle or pan.)


or a weld failure in the burner housing.

two minutes. Relight burner and burn on



surface is covered by objects or accessories.

least two minutes, then relight.
Allow burner to cool and inspect very

contact your authorized Napoleon dealer to
order a replacement burner assembly.
Contact your authorized Napoleon

replacement burner assembly.
Pilot will not light.
(if equipped)
Lack of gas.


Dirty pilot electrode.
Pilot is actually lit

20-30 seconds for air to purge the gas supply
line while pressing igniter. Fill propane cylinder.

it is best to light one of the tube burners before

reach the valves on the manifold more quickly.

Replace lead wire.
Clean pilot electrode.


hand 1 in. (2.5 cm) above grill surface
over the pilot burner to feel for heat.


Electric Power is out
The grill is nor receiving electric power
Check the power outage in your area
Ensure the grill is connected between the
wall and the power bar of the grill
Ensure the red indicator is ON in the control box
Check if the fuse on the wire in the
cabinet is broken or not

lights work but the knob

turning the power switch ON

does not work properly
The wire harness does not work properly
Ensure the blue indicator is ON
Turn the sensor ON by clicking the


Replace the wire harness of the control panel




The ignitor switch does not work properly
The ignitor block does not work properly
Replace the ignitor switch if the switch light
illuminates when you turn the light switch on


the switch when you turn it on.
Replace the ignitor block if the switch
illuminates and sparking noise can be heard.

the side or rear burner, even
when sparking noise occurs
The gap between electrodes
is too big or too small
Adjust the gap between two prongs
of the side burner electrode when
the side burner does not ignite.
Adjust the gap between the electrode
and the rear burner when the rear burner
when the rear burner foes not ignite
The knob and switch

with 0.5 seconds intervals

 
Loading ...
Loading ...
Loading ...