Loading ...
Loading ...
Loading ...
16
13. DELIVERING HOT WATER U
To deliver hot water, proceed as follows:
1. Place a cup under the spout (A14).
2. Select the function as described in the following
paragraphs.
13.1 Your beverage at a touch
On the homepage (B), press the image corresponding to hot
water. The appliance proceeds with preparation and the image
of the beverage appears on the display (B5) together with a pro-
gress bar which gradually lls as the operation proceeds and a
description of the phase (water delivery).
At the end of preparation, the message "Your beverage is
ready!" appears on the display. The appliance is now ready to
be used again.
Please note:
As soon as delivery has ended, to increase the quantity of water
in the cup, just press "Extra". When the required quantity is
reached, press "Stop".
13.2 Customising the beverages
To deliver the desired quantity of hot water, proceed as follows:
1. Press
(B3) at the bottom of the image corresponding
to hot water: the quantity to be customised according to
your tastes appears on the display (B5):
"Quantity"
2. After selecting the quantity, press "Start": The appliance
proceeds with preparation and the image of the beverage
appears on the display together with a progress bar which
gradually lls as the operation proceeds and a description
of the phase (water delivery).
3. When delivery has ended, press "Save" to save the settings,
or "Cancel" to retain the previous parameters.
4. Press "OK" to go back to the homepage .
The appliance is now ready to be used again.
Please note:
• If "Energy Saving" mode is active, you may have to wait a few
seconds before the hot water is delivered.
• To interrupt delivery of hot water manually, press "Stop"
and "Cancel".
• As soon as delivery has ended, to increase the quantity of
coee, just press "Extra". When the required quantity is
reached, press "Stop".
14. GUIDED BEVERAGE CUSTOMISATION MY
U
You can use this function to customise all beverages with the
MY symbol at the bottom of the image in beverage settings
(on the homepage (B), press at the bottom of the image
corresponding to the required beverage). To customise, proceed
as follows:
1. Make sure the prole (B2) for which you want to customise
the beverage is active;
2. Press
(B3) at the bottom of the image corresponding
to the desired beverage;
3. Press at the bottom of the image corresponding to the
beverage;
4. Press "OK" to follow the guided procedure;
5. Select your preference and press "Next" to move on to the
next step (or "Back" to go back to the previous screen);
6. Press "OK" to begin delivery;
7. Preparation begins and the appliance displays the quantity
customising screen in the form of a vertical bar (in the case
of beverages with more than one ingredient, customise
both ingredients).
8. When the quantity reaches the minimum amount you can
set, "Stop" appears on the display (B5).
9. When the required quantity has been delivered into the
cup, press "Stop".
10. If you are satised with the result in the cup, press "Save"
to save the settings, or "Cancel" to retain the previous
parameters.
11. Press "OK" to go back to the homepage .
The appliance goes back to the homepage.
Please note:
• If you save the new settings, they are memorised ONLY in
the selected prole.
• When you customise a single beverage, the respective
double version is also customised and the appliance dis-
plays the message "Settings saved on both double and
single option";
• You can also customise the beverages by connecting with
the DeLonghi Coee Link App.
• Press "Cancel" to exit programming at any moment. The
values will not be saved.
• When a beverage has been customised, "Reset" (under the
image) and "my" (among the quantity selections) appear
in the settings. Press "Reset" to reset the default values for
the beverage.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 40 ml 20-180 ml
IDEAL
ESPRESSO
40 ml 30-60 ml
2X ESPRESSO 40 ml + 40 ml 20-180 ml +
20-180 ml
Loading ...
Loading ...
Loading ...