Loading ...
Loading ...
Loading ...
15OPERATION
ENGLISH
Status Display
NOTE
• Remove all the protective plastic from the vacuum cleaner before use. Otherwise, it may cause abnormal
noise during the dust emptying operation.
Using the Product
Using the Manual Mode
1 Insert the vacuum cleaner into the product.
• After adjusting the length adjustment pipe
of the vacuum cleaner to the shortest
length, attach it to the product.
• If the vacuum cleaner pipe is connected to a
combination tool or a crevice tool, the
vacuum cleaner doesn't fit inside the
product. Use it without the combination
tool or the crevice tool.
• If the vacuum cleaner fits properly inside
the product, the alarm will sound. If the
alarm does not sound, reinsert the vacuum
cleaner, making sure that the nozzle sits flat
on the floor.
• Before starting the dust emptying
operation, pull the easy dust emptying lever
on the vacuum cleaner down 2 or 3 times to
sweep away the dust to make the operation
easier.
List Descriptions
a
Dust Emptying
(Replace Bag)
Indicator
• Indicates the dust emptying operation status or when to replace the
dust bag.
- White: Product is emptying dust.
- Flashing red: If the indicator flashes red while emptying dust, replace
the dust bag at the end of the dust emptying operation.
- Flashing red, beeping: If the dust emptying operation is complete and
the dust bag is full, the indicator will flash red, beep 10 times and
then turn off.
- If the indicator flashes red, replace the dust bag to maintain product
performance.
b
Auxiliary Battery
Indicator
• Indicates the charging status of the auxiliary battery.
- Flashes: When the auxiliary battery is mounted in the charger.
- Lights up briefly and then turns off: Auxiliary battery charging is
complete.
- The auxiliary battery will not charge until the battery mounted in the
vacuum cleaner is fully charged. Check the battery level on the handle
of the vacuum cleaner to check whether charging is complete.
c
Auto Emptying
Indicator
• Lights to indicate that the automatic dust emptying mode is on.
- Automatic dust emptying mode automatically starts to operate every
time the vacuum cleaner is mounted correctly onto the product.
- If you remove the vacuum cleaner and mount it immediately, dust
emptying operation may not start automatically, depending on the
circumstance. If it doesn't start automatically, select the Start/Stop
button to start.
AUTO
Loading ...
Loading ...
Loading ...