Loading ...
Loading ...
Loading ...
ASSEMBLY
HOW TO SET UP YOUR TRACTOR
CHECK BATTERY (See Fig. 2)
• Lift seat pan to raised position and open battery box
door.
• If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery f,or minimum of one hour at 6-10 amps.
(See BATTERY in CUSTOMER RESPONSIBILITIES
section of this manual for charging instructions).
SEAT PAN
BATTERY BOX
DOOR
TERMINAL
LABEL
F_G. 2
o
o
o
Q
INSTALL SEAT (See Fig. 3)
Adjust seat before tightening adjustment bolt.
Remove cardboard packing on seat pan.
Place seat on pan and assemble shoutder bolt.
Tighten shoulder bolt securely.
Assemble adjustment bolt, lock washer and flat
washer loosely. Do not tighten.
Lower seat into operating position and sit on seat.
Slide seat until a Comfortable position is reached
which allows you to press clutch!brake pedal all the
way down (See Fig. 4).
• Get off seat without moving its adjusted position.
° Raise seat and tighten adjustment bolt securely.
SEATPAN
SHOULDER
BOLT
ADJUSTMENT
BOLT
FIG. 3
FLAT WASHER
LOCK WASHER
CHECK TIRE PRESSURE
The tires on your tractor were overinfiated at the factory
for shipping purposes. Correct tire pressure is important
for best cutting performance.
- Reduce tire pressure to PS! shown in "PRODUCT
SPECIFICATIONS" on page 3 of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing should be prop-
erfy leveled. See "TO LEVEL MOWER HOUSING" in the
Service and Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL
BELTS
See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments
section of this manual. Verify that the belts are routed
correctly,
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments section of this
manual.
J CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RE-
CEIVE THE BEST PERFORMANCE AND SATISFAC-
TION FROM THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST."
V" All assembly instructions have been completed.
,/ No remaining loose parts in carton.
,/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
,/ Seat is adjusted comfortably and tightened securely.
Z All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,/ Be sure mower deck is properly leveled side-to-
side/front-to-rear for best cutting results. (Tires must
be properly inflated for leveling).
/ Check mower and drive belts. Be sure they are rout-
ed properly around pulleys and inside all belt keep-
ers.
/ Check wiring, See that all connections are still
secure and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR,
PAY EXTRA ATTENTION TO THE FOLLOWING IMPOR-
TANT ITEMS:
/ Engine oil is at proper level.
,[ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,z Become familiar with all controls - their location and
function. Operate them before you start the engine.
•/ Be sure brake system is in safe operating condition.
7
Loading ...
Loading ...
Loading ...