Loading ...
Loading ...
Loading ...
WINDROWER OPERATION
169304 61 Rev. C
6.3.8.2.1 From Field to Transport Mode
6.3.8.2.1.1 Detach Header from Windrower
a. Set header on the ground (field position).
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
b. Disconnect hydraulic and electrical connections:
1. Left Side - Store hydraulic hoses and
electrical cable into the storage position.
See Header Operator’s Manual.
2. Right side – Release the multi link and place
into storage on windrower. See Header
Operator’s Manual.
c. Retrieve temporary lift pin from storage location
on weight box and install into rear hole
(A) at the
top of the lift arms for additional lift height for
transport wheel deployment.
DANGER
To avoid bodily injury from fall of raised
header, always engage header lift cylinder
stops when working on or around raised
header.
d. Raise header to full height, stop engine, and
engage safety locks on lift cylinders.
e. Deploy header slow speed transport system.
See Header Operator’s Manual.
f. Remove float pin from engaged position (B) and
insert in storage location (C). Secure with lynch
pin.
g. Remove pins (D) from lower end of lift linkages.
NOTE
Pins (D) are also used to secure weight
box to windrower linkage.
h. Disconnect the center link as follows:
HYDRAULIC LINK – OPTION
1. Pull up on latch (E) and locate latch into
notch (F) on top of hook.
(continued next page)
D
D60 SHOWN
E
F
A
B
C
Loading ...
Loading ...
Loading ...