Loading ...
Loading ...
Loading ...
SECTION2: CONTENTSOFHARDWAREPACK(BoxedUnit)
Lay out the hardware according to the illustration below for identification purposes. Part numbers are shown in
}arentheses. (Hardware pack may contain extra items which are not used on your unit.)
AI ATTACHING THE HANDLES Lock Washers
736-0119 (4)
Hex Bolts _
III!IIItHI]III]III
]HHJH ]IIHH (,_ _.._
O_ ATTACHING SPEED SELECTOR PLATE
AND SHIFT LEVER
.exOo,ts
710-3015(2) _ Hex Lock Nuts
_ 7!2,3027( 2)
E_ "Z" FITTING NUTS
Hex Nuts
712-0121 (2)
Flat Washer Cupped Washer
736-0185 736-0242 0 0
Hairpin Clip
714-0104
G_ ATTACHING CHUTE DIRECTIONAL CONTROL
Hex Nuts
712-3010 (2)
E_ ATTACHING CLUTCH GRIPS
Hex Lock Nut Spacer Hex Cap Screw
712-0429 (2) 750-1032 (2) 710_3103 (2)
(No Picture) (No Picture)
F_ ATTACHING CHUTE ASSEMBLY
Hex Bolts Hex Lock Nuts
710-3015 (6) 712-3027 (6)
_- _--- _ Chute Flange Keepers
731-0851 (3) Not Shown
H J REPLACEMENT SHEAR BOLTS
Hex Lock Nuts
712-0429 (2)
Hex Bolts
710-0890A (2)
NOTE: The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign
object or an ice jam, the snow thrower is designed so that the bolts may shear. Two replacement shear bolts and
nuts are provided for your convenience. Store in a safe place until needed.
Loading ...
Loading ...
Loading ...