Loading ...
Loading ...
Loading ...
2
5
Always keep your work area clear:
•
Never operate the machine with any air openings blocked. Keep ventilation
openings of the machine and foot control free from the build up of lint,
dust, and loose cloth.
•
Do not store objects on the foot controller.
•
Never drop or insert foreign objects in any opening.
•
Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
•
Do not use the machine near a heat source, such as a stove or iron;
otherwise, the machine, power cord or garment being sewn may ignite,
resulting in fire or an electric shock.
•
Do not place this machine on an unstable surface, such as an unsteady or
slanted table, otherwise the machine may fall, resulting in injuries.
6
Special care is required while sewing:
•
Always pay close attention to the needle. Do not use bent or damaged
needles.
•
Keep fingers away from all moving parts. Special care is required around
the machine needle.
•
Switch the machine to the symbol “O” position to turn it off when making
any adjustments in the needle area.
•
Do not use a damaged or incorrect needle plate, as it could cause the
needle to break.
•
Do not push or pull the fabric while sewing, and follow the instructions
carefully when free motion stitching so that you do not deflect the needle
and cause it to break.
7
This machine is not a toy:
•
Your close attention is necessary when the machine is used by or near
children.
•
This product contains small parts. Keep the product out of the reach of
children to prevent accidental ingestion of small parts.
•
The plastic bag that this machine was supplied in should be kept out of the
reach of children or disposed of. Never allow children to play with the bag
due to the danger of suffocation.
•
Do not use outdoors.
8
For a longer service life:
•
When using and storing this machine, avoid direct sunlight and high
humidity locations. Do not use or store the machine near a space heater,
iron, halogen lamp, or other hot objects.
•
Do not use cleansers or organic solvents, such as thinner, petroleum ether
or alcohol, to clean the machine. Otherwise, the finish may peel off or
become scratched.
•
Always consult the Operation Manual when replacing or installing any
assemblies, the presser feet, needle, or other parts to assure correct
installation.
9
For repair or adjustment:
•
If the light unit is damaged, it must be replaced by an authorized Brother
dealer.
•
In the event a malfunction occurs or adjustment is required, first follow the
troubleshooting table in the back of the Operation Manual to inspect and
adjust the machine yourself. If the problem persists, please consult your
local authorized Brother dealer.
Loading ...
Loading ...
Loading ...