Loading ...
Loading ...
Loading ...
21
Basic Sewing (2)
Rolled Hem Foot
1 Attach rolled hem foot.
✽
Refer to page 19 for instructions
on changing sewing feet.
2
Position the fabric (reverse side
facing up) under the presser foot.
Insert needle approximately 0.5 cm
(approx. 3/16 inch) from the edge
of the fabric and sew 2 stitches.
0.5 cm
0.5 cm
Thread end
Rolled Hem
Thread
5 With your right hand, put the
edge of the rolled hem under
the presser foot, from the spot
where the threads come out.
Insert the edge so that it lies
directly under the needle. Lower
the presser foot.
6 Pull gently on threads in left
hand while sewing the first 3-4
stitches to hold them in place.
7 Fold hem over about 0.5 cm
(approx. 3/16 inch) and continue
feeding folded hem under
foot while sewing towards the
curved guide on the foot.
3 Turn the handwheel towards
you to raise the needle, raise the
presser foot, then pull the fabric
forward.
✽ Be sure not to unthread the
fabric while pulling it forward.
4 Hold the 4 threads in your left
hand.
CAUTION
Make sure the power to the machine is o before changing presser feet.
Loading ...
Loading ...
Loading ...