Smeg SO6102S3PB3 Steam100 Galileo Oven 60cm

User Manual - Page 40

For SO6102S3PB3.

PDF File Manual, 51 pages, Read Online | Download pdf file

SO6102S3PB3 photo
Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 9591477A627/B
e
It is not possible to select any function once the
door lock device has been activated. It is still
possible to switch off the appliance:
1. Press the button for a few seconds on
the display.
2. When the control panel is reactivated, press
the touch button to end the function.
Programmed pyrolytic function
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After selecting the Pyrolytic function, press
button.
The and indicator lights on the display
flashes.
2. Press the and touch buttons on
the control panel to set the function end time.
3. Press the button to confirm.
The appliance waits until the set start time to start
the Pyrolytic function.
Descaling
Periodically the display will prompt you to
perform the boiler descaling procedure.
Preliminary operations
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Press the button to confirm.
The appliance suggests the Drain reservoir
function
.
4. Press the button to confirm.
The water starts to flow into the deep pan from
the drain pipe on the right side of the rear wall
of the oven cavity.
5. Wait for the end of the drain flow.
A beep sounds when finished.
6. Drain the water from the deep pan.
Press the button to continue the function. The
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
The presence of scale due to lack of
descaling can compromise correct
operation of the appliance in the long
term.
Descaling is a long process (more than
one hour) that requires the user to be
present in front of the appliance.
We recommend performing descaling
every time this is indicated on the
display in order to keep the boiler in
perfect operating condition.
The descaling process can be
cancelled 2 consecutive times by
pressing the button on the display.
After this, the appliance will not allow
you to run any other function until the
descaling process is performed.
Loading ...
Loading ...
Loading ...