Loading ...
Loading ...
Loading ...
92 - CLEANING AND MAINTENANCE 91477A627/B
Vapor Clean cycle setting
1. After entering the special functions menu,
press the and touch buttons on
the control panel until the function is
selected.
2. Press the button to confirm.
3. Fill the reservoir with clean water until the
maximum level indicator light
displays.
4. At the end, remove the funnel and place the
loading drawer back in its place.
5. Press the button to start the function.
At the end, is displayed and flashes
and a beep is activated.
6. Press the touch button on the control
panel to exit the function.
Programmed Vapor Clean cycle
It is possible to program the Vapor Clean
function start time, like any cooking function.
1. After selecting the Vapor Clean function,
press the button.
The and indicator lights on the display
flashes.
2. Press the and touch buttons on
the control panel to set the function end time.
3. Press the button to confirm.
The appliance waits until the set start time to start
the Vapour Clean function.
Reservoir draining
After Vapor Clean function:
1. Open the door
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
If the indoor temperature is higher than
expected, the function is not activated
and every time the button is pressed
the appliance makes a beep.
Let the appliance cool down before
activating the function.
The duration and temperature
parameters cannot be changed by the
user.
Before draining the reservoir, wait for
the oven to cool down, leaving the
door open. To make sure that the water
remaining in the reservoir is not too hot,
wait at least 40 minutes.
Loading ...
Loading ...
Loading ...