Loading ...
Loading ...
Loading ...
- 3 -
Revision 12/2022
Copyright © 2022, Fast ČR, a.s.
• Never use your fingers or other items to push ingredients through the feed tube of the meat grinder or grater. For this purpose there is apusher
included as an accessory.
• Do not tilt open the multi-function head during operation.
• Be especially careful when handling hot liquids and foodstuffs. Hot steam or splashing hot foods and liquids may cause scalding. For reasons of
increased safety, it is recommended to allow hot liquids and foods to cool down before processing them.
• If you have just processed hot foods, the removable attachments may be hot after they are used.
• Before attaching attachments to the appliance, removing or replacing them, ensure that the appliance is turned off and disconnected from the power
socket.
• To prevent injury caused by sharp edges, be especially careful when handling the grinding blade of the meat grinder and the blade assembly of the
blender. Increased attention must also be paid when emptying out the blending jar, when removing the blade assembly from the blending jar, when
removing the grinding blade from the chamber, and when cleaning the appliance.
• Do not attempt to grind bones, nut shells or other hard ingredients.
• Hot liquids up to atemperature of 55 °C may be processed in the stainless steel bowl. Be especially careful when handling hot liquids. Hot steam or
splashing hot foods and liquids may cause scalding. Never start the blender without the lid properly seated in position. When processing hot liquids,
do not remove the inner cap during operation. Do not touch the hot surface. Use the handle to carry the blending jar when it is hot.
• The maximum continuous operating time is 10 minutes. Do not exceed the maximum operating time of 5 minutes when in the kneading mode and
do not exceed the maximum operating time of 2 minutes when using the blender. Before starting it again, allow the appliance to cool down for 30
minutes.
Safety during maintenance
• Allow the appliance to always fully cool down before cleaning it.
• Regularly clean the appliance after each use according to the instructions in chapter Maintenance and cleaning. Do not perform any maintenance
on the appliance apart from the maintenance procedure described in chapter Maintenance and cleaning.
• Do not wash the multi-function head or stand under running water or submerge it in water or another liquid. The stand mixer is not designed to be
washed in adishwasher.
• The removable attachments are intended for short term contact with food (including beverages), i.e. max. 4 hours. To prevent damaging their surface,
do not leave them submerged, for example in water for extended periods of time.
• Before storing the appliance, check that the multi-function head is tilted to the horizontal position.
Loading ...
Loading ...
Loading ...