Loading ...
Loading ...
Loading ...
9
8
PLACING THE PORTA-FILTER
a. Position porta-lter underneath the
brew head.
b. Position handle so that the handle
lines up with the open lock icon “ ”
on the unit and ts into the groove.
c. Then, slowly turn it to the right until the
handle is aligned with the closed lock
symbol “ ” on the unit.
a.
c.
b.
PLACING THE CUP(S)
a. Adjust the height by inserting the
removable drip grid in the height-
adjusting slot if you are using a small
“demitasse” cup(s) to brew espresso.
b. Keep the removable drip grid on top
of the removable drip tray if you are
using a larger cup to brew cappuccino
or latte.
CAUTION: When brewing cappuccino
or latte, please make sure to adjust the
frothing tube lever in order to position the
frothed milk dispensing tube to point inside
the cup that is being used.
TURNING THE UNIT ON
a. Make sure unit is plugged into the
appropriate electrical outlet.
b. Turn unit on “I” using the on/off “I/O”
switch located on the right side on the
unit.
The 2 control panel lights (Espresso
heater “ ” and Steam heater “ ” ) will
start blinking during the heating process
and until the water and milk (if preparing
cappuccino or latte) reach the perfect
temperature. Once these lights become
solid, the unit is ready to use.
SELECT THE FUNCTION
PREPARING ESPRESSO
a. Press the Espresso Button “ ” once
to brew a single shot. The indicator
light for a single shot of espresso will
turn on. It will start blinking; indicating
that a single shot of espresso is
brewing.
b. Press the Espresso Button “ ” twice
to brew a double shot or two single
shots of espresso. The indicator light
for a double shot of espresso will turn
on. It will start blinking; indicating that
a double shot of espresso is brewing.
For both Automatic Espresso
functions, the unit will start brewing the
espresso according to your selection.
The unit will stop automatically after
the brewing process and the light will
become solid, indicating that the cycle
has been completed. Your delicious
espresso is ready to be enjoyed!
NOTE: If you would like to brew less
coffee than the preset serving, press
the function button at any time during
the brewing process to stop when the
desired amount of coffee is reached.
c. Press the Manual Espresso Button
“ ” once to brew espresso to your
preference. Once nished, press the
Manual Espresso Button “ ” once
again to stop it.
PREPARING CAPPUCCINO
Prior to preparing your cappuccino,
adjust the level of frothed milk according
to your preference by turning the Froth
Control Knob to the right for more foam
(cappuccino) and to the left for less foam
(latte).
NOTE: The level of foam can also be
adjusted during the brewing cycle.
a. Press the Cappuccino Button “
” once to brew a small cup of
cappuccino. The indicator light for
small cup of cappuccino will turn on.
It will start blinking, indicating that a
small cup of cappuccino is brewing.
b. Press the Cappuccino Button
“ ” twice to brew a large cup of
cappuccino. The indicator light for
large cup of cappuccino will turn on.
It will start blinking, indicating that a
large cup of cappuccino is brewing.
The unit will start brewing cappuccino
according to your selection. The unit
will stop automatically after the brewing
process and the light will become solid,
indicating that the cycle has been
completed. Your delicious cappuccino is
now ready to be enjoyed!
c.
b.
a.
a.
b.
a.
x1x1
b.
x2x2
c.
MORE FOAM LESS FOAM
a.
x1x1
b.
x2x2
Loading ...
Loading ...
Loading ...