Loading ...
Loading ...
Loading ...
5.Advanced User Guidebook
50
Load
Recall the setting from the selected address
When the type is Image, the menu shows as following:
Save
Save the current display screen. The file can
be only stored in a USB storage, so a USB
storage must be connected first.
The file
name is editable. The file is stored in BMP
format.
Save and Recall the Waveform
The oscilloscope can store 15 waveforms, which can be displayed with the current
waveform at the same time. The stored waveform called out can not be adjusted.
In order to save the waveform of the CH1 into the address 1, the operation steps should be
followed:
1. Saving: Press the H1 button, the Type menu will display at the left of screen, turn the
M knob to choose Wave for Type.
2. Press the H2 button and press F1 button to select CH1 for Source.
3. Press the H3 button and press the F1, turn the M knob to select 1 as object address.
4. Press the H5 button and press F1 button to select Internal.
5. Press the H4 button to save the waveform.
6. Recalling: Press the H3 button, and press the F1, turn the M knob to select 1 as
object address. Press F2 button to set Show as ON. The waveform stored in the
address will be shown, the address number and relevant information will be displayed
at the top left of the screen.
Figure 5-36 Wave Saving
Tip:
Loading ...
Loading ...
Loading ...