Loading ...
Loading ...
Loading ...
9.Technical Specifications
95
9. Technical Specifications
Unless otherwise specified, the technical specifications applied are for SDS-E only,
and Probes attenuation set as 10X. Only if the oscilloscope fulfills the following two
conditions at first, these specification standards can be reached.
This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on P15).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Performance Characteristics
Instruction
Bandwidth
SDS5032E(V)
30 MHz
SDS5052E(V)
50 MHz
SDS6062E(V)
60 MHz
SDS7072E(V)
70 MHz
SDS7102E(V)
100 MHz
SDS7122E(V)
125 MHz
Channel
2 + 1 (External)
Acquisition
Mode
Normal, Peak detect, Averaging
Sample rate
(real time)
SDS5032E(V)
Dual CH
250MS/s
Single CH
500MS/s
SDS5052E(V)
Dual CH
250MS/s
Single CH
500MS/s
SDS6062E(V)
Dual CH
250MS/s
Single CH
500MS/s
SDS7072E(V)
Dual CH
500MS/s
Single CH
1 GS /s
SDS7102E(V)
Dual CH
500MS/s
Single CH
1 GS /s
SDS7122E(V)
Dual CH
500MS/s
Single CH
1 GS /s
Input
Input coupling DC, AC , Ground
Input impedance
SDS5032E(V)
SDS5052E(V)
1 MΩ ± 2%, in parallel with
10 pF ± 5 pF
SDS6062E(V)
SDS7072E(V)
SDS7102E(V)
SDS7122E(V)
1 MΩ ± 2%,
in parallel with
15 pF ± 3 pF
Probe attenuation
factor
1X, 10X, 100X, 1000X
Loading ...
Loading ...
Loading ...