Loading ...
Loading ...
Loading ...
Maintenance Daily, before
operation (10
hour intervals)
After the
first 25
hours
Weekly
(40 hour
intervals)
Maintenance inter-
val in hours
100 200 400
Clean the inner surfaces of the frame tunnel *
Lubricate the seat slides X
Lubricate the articulated bearing X X
Lubricate according to the lubrication overview X X X
Clean the cutting deck, below the belt covers and be-
low the cutting deck
X
Make sure that the tire pressure is correct X X
Replace the engine oil X X
Replace the oil filter X O
Clean the air filter X X
After the cleaning procedure, do a visual inspection of
the PTO belt tension
* * *
After the cleaning procedure, do a visual inspection of
the pump belt tension
* * *
After the cleaning procedure, do a visual inspection of
the cutting deck bolts for the belt pulleys and the
blades
*
After the cleaning procedure, do a visual inspection of
the hydraulic hoses and couplings to make sure that
they are clean and not damaged
*
After the cleaning procedure, do a visual inspection of
the joint bearing in the articulation
*
After the cleaning procedure, do a visual inspection of
all pulleys
*
Replace the inner air filter X X
Replace the air filter cartridge X
Replace the fuel filter X X
Do a check of the headlights, replace broken lamps X X X
Do a check of the parallelism of the cutting deck X X
Lubricate the belt adjuster X O O
Lubricate the joints and bearings on the cutting deck X
Lubricate the pedal system in the frame tunnel X
Lubricate the chains in the frame tunnel X
Lubricate the parking brake cable X
Lubricate the throttle cable (P 524 only) X
Lubricate the choke cable (P 524 only) X
Lubricate the cable for the hydrostatic transmission X
22 242 - 003 -
Loading ...
Loading ...
Loading ...