JBL L100 CLASSIC 75 Owners Manual Multilingual

Loading ...

English

CONTROLS/ADJUSTMENTS

The L100 Classic 75 has front-panel adjustments that let you balance the

levels of the midrange driver (MF) and tweeter (HF) relative to the woofer.

You can use these controls to adjust the speaker’s sound according to

your room’s acoustics, or your personal taste. The “0dB” default position

is a good place to start. Whatever sounds best to you in your room is the

right setting.

As with most speakers, after you start playing the L100 Classic 75 it will

take the drivers’ suspensions several weeks to “break in” and achieve

optimum performance. During this period, the balance between the

woofer, midrange, and tweeter may change, so we recommend that you

adjust the midrange and tweeter controls again after the break-in period.

NOTE: There is a protective plastic film on the front control panel label that may be removed.

CARING FOR YOUR SPEAKERS

•Wipethecabinetwithaclean,dryclothtoremovedust.Dampclothsorcleaningpapermaydullthecabinet’s

finish.

•Donotusevolatileliquidssuchasbenzene,paintthinner,alcohol,etc.,onthecabinet.Donotsprayinsecticide

near the cabinet.

•Toremovedustfromthefoamgrille,useavacuumcleanersettolowsuction.

•Donotwashthegrilleinwater.

•Ifthesurfacesofthewooferandmidrangeconesbecomedusty,youcancarefullysweepthemcleanwithasoft,

dry calligraphy brush or paintbrush. Do not use a damp cloth.

•NEVERtouchanythingtothetweeterdome.

SPECIFICATIONS

Speaker Type 3-way 12" (300mm) Bookshelf Loudspeaker with Stand

Low-frequency Transducer 12-inch (300mm) Pure Pulp cone (JW300SW-8)

Midrange Transducer 5-1/4 inch (130mm) Polymer-coated, Pure Pulp cone (JM125PC-8)

High Frequency Transducer 1-inch (25mm) Titanium dome with soft surround (JT025TI2-4)

Recommended Amplifier Power 25-200 Watts RMS

Frequency Response (-6 dB) 40Hz–40kHz

Sensitivity (2.83 V @ 1 m) 90dB

Nominal Impedance 4 Ohms

Crossover Frequencies 450Hz, 3.5kHz

Enclosure type Bass-reflex via Flared Front-firing Port

Controls Attenuators for MF and HF drivers

Inputs: Dual Sets Gold-plated Five-way Binding Posts

Dimensions (H x W x D) with grille 25.35" x 15.37" x 14.27" (643.8 x 390.4 x 362.4mm)

Weight with grille 63.05lb (28.6kg)

Finishes Genuine Teak Wood Veneer

Speaker Stand JS-120

Front Height 7.075" (179.7mm)

Rear Height (including riser) 9.29" (235.9mm)

Width x Depth 14.25" x 11.05" (362 x 280.6mm)

Weight 14.33lb (6.5kg)

Tweeter

Control

Midrange

Control

Loading ...

JBL L100 CLASSIC 75

Owners Manual Multilingual - Page 7