Loading ...
Loading ...
Loading ...
P a g e |14
ONLINE: TRINITYAPPLIANCES.COM.AU
fig.3
fig.
4
Do not use adhesive to fix the hob into the worktop.Once the seal is fitted
position the hob into the cutout in the worktop. Spply gentle downwards
pressure onto the hob to push it into the worktop ensuring a good seal
around the outer edge(fig.4)
4.3 CAUTIONS
1. The induction hotplate must be installed by qualified personnel or
technicians. We have professionals at your service. Please never
conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge,
freezer, washing machine or clothes dryer, as the humidity may
damage the hob electronics
3. The induction hotplate shall be installed such that better heat
radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall
withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
4.4 CONNECTING THE HOB TO THE MAIN POWER SUPPLY
This hob must be connected to the mains power supply only by a
suitably qualified person. Before connecting the hob to the mains power
supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on
the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
Loading ...
Loading ...
Loading ...