Loading ...
Loading ...
Loading ...
P a g e |11
ONLINE: TRINITYAPPLIANCES.COM.AU
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
Before using your New Ceramic Hob:
Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your Ceramic hob.
4. INSTALLATION
4.1 SELECTION OF INSTALLATION EQUIPMENT
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space
shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please
select heat-resistant work surface material to avoid larger deformation
caused by the heat radiation from the hotplate. As shown below:
H
SEAL
W
D
L
X
B
X
X
A
X
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm)
590
520
58 54
565
495
50 minimum
Under any circumstances, make sure the Induction cooker hob is
well ventilated and the air inlet and outlet are not blocked. Ensure
the Induction cooker hob is in a good work state. As shown below:
Note: The safety distance between the hotplate and the
cupboard above the hotplate should be at least 760 mm.
Loading ...
Loading ...
Loading ...