Loading ...
Loading ...
Loading ...
P a g e |13
ONLINE: TRINITYAPPLIANCES.COM.AU
When you have installed the hob, make sure that:
SILICONE
SILICONE
Cut out worktop to supplied dimensions shown(fig.1) with suitable
equipment. Seal the cut edge of the worktop using silicone PTFE and
allow to dry prior to fitting the hob.
the power supply cable is not accessible through cupboard doors or drawers;
there is adequate flow of fresh air from outside the cabinetry to the base of
the hob;
if the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob;
the isolating switch is easily accessible.
fig.1
fig.2
Stretch out the supplied seal along the underside edge of the
hob,ensuring the ends overlap.
4.2 INSTALLATION
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
locating the fixing brackets
• The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
Loading ...
Loading ...
Loading ...