Loading ...
Loading ...
Loading ...
20 21
Owner's Manual Owner's Manual
OPERATING INSTRUCTIONS (Continued)
1
DO NOT PUSH THE
DEMOUNTING
BUTTON FORWARD
WHILE SHAKING.
Using the Fry Pan Divider:
Fig.1.
Make sure all 4 Silicone Tabs are
placed on the Divider tabs.
Fig. 2.
Looking down at the Fry Pan Basket,
slide the Divider down the center of
the Basket.
Make sure the Divider is between both
the groves and screws of the Basket.
To remove Divider, simply slide the
Divider straight up. (Caution: Divider
will be hot from cooking.)
You can remove the Silicone Tabs from
the Divider when cleaning.
XX
Shaking Food
Some foods require shaking halfway
through cooking. To properly shake the
food, hold the handle, remove the Base
Tray from the appliance, and shake. Once
the food has been adequately shaken,
slide the Base Tray and Fry Pan Basket
back into the NuWave Digital Brio 6-Qt
Digital Air Fryer.
2
Silicone Tabs
CARE & MAINTENANCE
Note: For best results, when cooking, do
not ll more than
4
⁄
5
full.
Cleaning
Clean the appliance after every use or in between a number of large batches.
The Fry Pan Basket and the Base Tray have a non-stick coating with a
stainless steel Basket Net. Do not use metal utensils or harsh abrasives when
cleaning as this can damage the coating.
1. Unplug the appliance and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Base Tray, Fry Pan Basket, Fry Pan Basket Net, or removable
components with a nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and Fry Pan Basket and place on a heat-
resistant surface to help cool the appliance quicker.
Note: If using the dishwasher for the Base Tray, Fry Pan Basket, and Fry Pan
Basket Net, it is recommended to use top rack only.
Tip: If there is residual food in the Base Tray and Fry Pan Basket, add some
hot water and let it soak separately for about 10 minutes for easier cleaning.
Afterward, use a soft cleaning brush to remove any lingering food.
Storage:
1. Unplug the appliance and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Push the power cord into the storing capsule. Afx the cord by inserting it
into the cord-afxing opening in the back of the unit.
IMPORTANT - Do not immerse unit in water
or attempt to cycle through dishwasher.
The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge.
Make sure unit has cooled completely prior
to cleaning.
WARNING
In case of other problems, immediately unplug and contact
Customer Service Department.
1-877-689-2838 • help@nuwavenow.com
Loading ...
Loading ...
Loading ...