Loading ...
Loading ...
Loading ...
14 15
Owner's Manual Owner's Manual
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS (Continued)
Before First Use:
1. Remove all the packaging materials.
2. Remove the glue and labels on the appliance.
3. Clean the Base Tray and Fry Pan Basket with Fry Pan Basket Net thoroughly
with hot water, a nonabrasive sponge, and a mild dish detergent, or in the
dishwasher, top rack only.
4. Wipe the inside and outside of the appliance with a wet cloth. Do not
immerse the appliance in water. See "Assembling the Brio" under
Operating Instructions for more.
Note: This appliance cooks using hot air. DO NOT ll the Fry Pan Basket
with oil.
Operation Preparation:
1. Place the appliance on a level, even, and stable heat-resistant surface.
2. Place the Base Tray and Fry Pan Basket in the Brio. See "Assembling the
Brio" under Operating Instructions for more.
3. Plug the appliance into a standard wall socket. The power plug is included in
the package.
Note: Do not cover or block the vent located on the back of the Brio. Doing so
can prevent proper ventilation and will adversely affect the cooking results.
On/Off Function
1. Press “ON/OFF” once to turn the unit on.
• The control panel should display “0”, indicating that no cooking time
or temperature has been selected and the unit is powered on.
• The light above the last used wattage will be on.
2. Press “ON/OFF” again to turn the unit off, and the last wattage
used will be ashing.
Wattage Function
The default wattage of the Brio is 1800 watts.
1. To change the wattage, press “WATTS” once. The light will
illuminate above the “900”, indicating that the Air Fryer is now set
to 900 watts.
2. Press “WATTS” once more and the light above “1500” will
illuminate. The Air Fryer is now set to 1500 watts.
3. Press “WATTS” again and the light above “1800” will illuminate,
indicating the Air Fryer is now set to the default of 1800 watts.
Note: If you change the wattage from the default 1800W to either
900W or 1500W and unplug or turn off the unit, the Brio will remember
the last wattage setting when it is turned back on. The light above that
wattage will ash until unit is turned on and then it will remain solid.
ON
OFF
WATTS
Easy Start/Pause Function
1. Press “START/PAUSE” once to begin cooking. “TIME” will be
displayed. “0:15” and the FAN Icon will also be displayed with the
“:” and FAN Icon ashing.
• The Brio will start to countdown. The default is 360°F for
15 minutes.
• To interrupt the cooking process, press “START/PAUSE”.
• To resume cooking or preheating, press “START/PAUSE” again.
• Once the Brio nishes cooking, the unit will “beep” three
times and the control panel will display “End”.
Note: Removing the Base Tray and Fry Pan Basket will also Pause
the unit. “OPEN” will be displayed on the control panel. Return the
Base Tray and Fry Pan Basket to resume cooking.
Pre-Heat Function
The Pre-Heat function ensures that the Brio reaches the desired
temperature before you begin cooking your food. The Pre-Heat
function is the perfect choice for foods that require a crisp nish,
such as frozen appetizers, French fries or chicken wings.
1. Press “PRE-HEAT”. The control panel will display “PRE-HEAT”
and “0”. The default for Pre-Heat is 360°F for 15 minutes.
2. To preheat with the default settings, press “START/PAUSE”. The
control panel will display “TEMP” and “PRE-HEAT”. “360F” and the
FAN Icon will ash during pre-heating.
• Once the preheat temperature is reached, the control panel
will display “READY” and “TIME” and the Air Fryer will beep
once. “5” will ash and a 5-minute countdown will begin.
• The unit will maintain the pre-heat temperature during the
5-minute countdown OR until the Fry Pan Basket is removed,
whichever comes rst.
3. Once the food has been added to the Fry Pan Basket, insert the
Fry Pan Basket back in place. This will start the cooking process at
the selected temperature and time.
• If no temperature or time were selected prior to Pre-heat, the
default temperature (360°F) and time (15 minutes) will be used.
• If nothing is done within the 5-minute countdown, the NuWave
Brio will return to the ON setting and “0” will be displayed.
START
PAUSE
PRE-
HEAT
Loading ...
Loading ...
Loading ...