Loading ...
Loading ...
Loading ...
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation (continued)
ELECTRICAL REQUIREMENTS
WARNING:
□ Plug into a grounded 3-prong outlet.
□ Do not remove ground prong.
□ Do not use an adapter.
□ Do not use an extension cord.
□ Failure to follow these instructions can result in death, re, or electrical shock.
Recommended Grounding Method
This portable air conditioner must be grounded. This portable air conditioner is equipped with a power supply cord with a three-prong
grounding plug. The cord must be plugged into a properly grounded three-prong outlet, grounded in accordance with all local codes and
ordinances. If a properly grounded outlet is not available, it is the customer’s responsibility to have a properly grounded three-prong outlet
installed by a qualied electrician.
Customer’s Responsibility
□ To contact a qualied electrician.
□ To assure that the electrical installation is adequate and conforms to the national electrical code, ANSI/NFPA 70-last edition, and all
local codes and ordinances.
Copies of the standards listed may be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
www.nfpa.org
Wiring Requirement
Power supply Model Time-delay fuse (or circuit breaker)
115V
103.5V min.
126.5V max.
5KBTU 10A
6KBTU 13A
Power Supply Cord
NOTE: Your air conditioner’s device may differ from the one shown. This room air conditioner is equipped with a power supply cord required
by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect
leakage current and power will be disconnected in a fraction of a second.
To test your power supply cord:
1. Plug power supply cord into a grounded 3-prong outlet.
2. Press RESET (2) (on some devices, a green light will turn on).
3. Press TEST (1) and listen for click. The RESET button will trip, and on some devices, a
green light will turn off.
4. Press and release RESET (2) and listen for click. The RESET button will latch, and on
some devices, a green light will turn on. The power supply cord is ready for operation.
NOTE:
□ The RESET button must be pushed in for proper operation.
□ The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.
□ Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.
□ A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be
repaired.
□ The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.
1
2
Loading ...
Loading ...
Loading ...