Loading ...
Loading ...
Loading ...
19 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Troubleshooting
Before calling for service, please try the suggestions below.
Problem Solution
Air conditioner will not operate
DANGER: ELECTRICAL SHOCK HAZARD
□ Plug into a grounded 3-prong outlet.
□ Do not remove ground prong.
□ Do not use an adapter.
□ Do not use an extension cord.
□ Failure to follow these instructions can result in death,
re, or electrical shock.
□ The power supply cord is unplugged. Plug into a grounded
3-prong outlet. See “Electrical Requirements” on page 5.
□ Time-delay fuse or circuit breaker of the wrong capacity is
being used. Replace with a time-delay fuse or circuit breaker
of the correct capacity. See “Electrical Requirements” on page
5.
□ The power supply cord has tripped (Reset button has popped
out). Press and release RESET to resume operation. (Listen for
click; RESET button will latch and remain in.)
□ A household fuse has blown, or a circuit breaker has tripped.
Replace the fuse, or rest the circuit breaker. See “Electrical
Requirements” on page 5.
□ The On/Off button has not been pressed. Press ON/OFF.
□ The local power has failed. Wait for power to be restored.
Air conditioner blows fuses or trips circuit breakers □ Too many appliances are being used on the same circuit. Unplug
or relocate appliances that share the same circuit.
□ You are trying to restart the air conditioner too soon after turn-
ing off air conditioner. Wait at least 3 minutes after turning off
air conditioner before trying to restart the air conditioner.
Air conditioner power supply cord trips (Reset button pops out) □ Disturbances in your electrical current can trip (RESET button
will pop out) the power supply cord. Press and release RESET to
resume operation. (Listen for click; RESET button will latch and
remain in.)
□ Electrical overloading, overheating, cord pinching or aging can
trip (RESET button will pop out) the power supply cord.
□ After correcting the problem, press and release RESET to
resume operation. (Listen for click; RESET button will latch
and remain in.) If the power cord fails to rest, contact a service
technician.
NOTE: A damaged power supply cord must be replaced
with a new power supply cord obtained from the product
manufacturer and must not be repaired.
Loading ...
Loading ...
Loading ...