Loading ...
Loading ...
Loading ...
14
EMX5 Owner’s Manual
Appendix
When you wish to connect multiple speakers from the [SPEAK-
ERS A/B] jacks in parallel, keep in mind that the overall imped-
ance does not fall below 4 ohms. When connecting speakers
with the same impedance in parallel, the overall impedance
value is half with two speakers, one-third with three speakers,
and only one-quarter with four speakers.
Connecting Speakers
CAUTION
• When connecting each device, only use appropriately
rated cables and plugs. Only use proper speaker cable
when connecting speakers.
• Make sure to insert the speaker cables all the way inside
until secure. When connecting a speakON plug, insert it all
the way inside, then turn until it locks in place.
• Use speaker cables with an insulated-housing connector.
2-channel Connection
When connecting using the following configuration, use speak-
ers with impedance from 4 ohms to 8 ohms.
4Ω to 8Ω 4Ω to 8Ω
2-channel Parallel Connection
When connecting speakers in parallel configuration, use speak-
ers with impedance from 8 ohms to 16 ohms.
8Ω to 16Ω 8Ω to 16Ω 8Ω to 16Ω 8Ω to 16Ω
Loading ...
Loading ...
Loading ...