Loading ...
Loading ...
Loading ...
47
maximum value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm
button to turn it on or off.
7. Tap Done to save the setting and return to the Live Data screen;
or tap Cancel to exit without saving.
If the threshold limits are successfully set, two horizontal lines now appear
on each of the data graphs (when Waveform Graph Mode is applied) to
indicate the alarming point. The threshold lines are shown in different
colors than the waveform of the parameters for distinction.
⚫ Record Button – displays the configuration screen for Record
Setting, on which you can set duration.
⚫ Done Button – confirms and saves the setting, and returns you to
the Live Data screen.
⚫ Cancel Button – cancels the setting operation, and returns you to
the Live Data screen.
4.6.5 Active Test
The Active Test function is used to access vehicle-specific subsystem and
component tests. Available test vary by manufacturer, year, and model, and
only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to drive
the actuators. This test determines the integrity of the system or parts by
reading the engine ECU data, or by monitoring the operation of the actuators,
such as switching a solenoid, relay, or switch, between two operating states.
Selecting Active Test opens a menu of test options that varies by make and
model. Selecting a menu option activates the test. Follow all screen instructions
while performing tests. How and what information is presented on the screen
varies according to the type of test being performed. Some toggle and variable
control tests display Active Test Controls at the top of the screen with data
stream information below, or vice versa.
Loading ...
Loading ...
Loading ...