Loading ...
Loading ...
Loading ...
10
J2534 Reprogramming Capability
The J2534 ECU Programming Device is a SAE J2534-1 & -2 compliant
PassThru reprogramming interface device. Using the updated OEM software,
it is capable of replacing the existing software/firmware in the Electronic Control
Units (ECU), programming new ECUs and fixing software-controlled drivability
issues and emission issues.
Communication
The J2534 ECU programming device supports BT and USB communications.
It can transmit vehicle data to the MaxiCOM display tablet with or without a
physical connection. The working range of the transmitter through BT
communication is 210 feet (about 70 m). A signal lost due to moving out of
range automatically restores itself when the display tablet unit is brought closer
to the VCI unit.
2.3.2 Power Sources
The J2534 programming device can receive power from both of the following
sources:
⚫ Vehicle Power
⚫ AC/DC Power Supply
Vehicle Power
The J2534 programming device operates on 12-volt vehicle power, which it
receives through the vehicle data connection port. The device powers on
whenever it is connected to an OBD II/EOBD compliant data link connector
(DLC). For non OBD II/EOBD compliant vehicles, the device can be powered
from a cigarette lighter or other suitable power port on the test vehicle using
the auxiliary power cable.
AC/DC Power Supply
The J2534 programming device can be powered from a wall socket using the
AC/DC power adapter.
Loading ...
Loading ...
Loading ...