Loading ...
Loading ...
Loading ...
105
General
Description
PC Interface
USB 2.0 – cable supplied
Power Requirements
Powered from USB port
Compliance
FCC (EMC), CE (EMC and LVD), RoHS
Warranty
1 year
NOTE*: Reduced to 20MS/s if channels A and B, or C and D, are enabled.
16.4 Screen Layout and Operations
The MaxiScope application works as a signal processing program that displays
the shape of electrical signals onscreen with a live graph showing voltage
against time. The grid on the screen shows divisions of voltage and time to
enable measurements to be made.
Units of voltage per division are shown down the side of the scope screen while
units of time per division are shown along the bottom. The graph is referred to
as a waveform and the scope repeatedly draws the trace across the screen
from left to right.
Before performing the MaxiScope application, the MaxiScope Module must be
connected to the display tablet. Apply appropriate probe accessories supplied
with the MaxiScope tool kit for use in various tests.
Figure 16-4 Sample MaxiScope Application Screen Layout
Loading ...
Loading ...
Loading ...