Loading ...
Loading ...
Loading ...
Troubleshooting
The point of impact moves between shots
Several factors can cause variations in the point of impact.
• Verify the mount screws are tightened to the maximum torque specification of 2.5 N-m (22 lbf-in.).
• Verify the lock knob is secure.
• Verify you are using the correct bolt profile for the bolt you are using.
• Inspect your crossbow and confirm all components are in good working condition.
My device displays only fixed aim points
When the batteries are low or do not meet the minimum power requirements for the laser rangefinder, the
device allows only fixed aim point sighting.
• Verify the battery level of the batteries you have installed.
• Verify you are using AAA lithium batteries.
Resetting the Device
If the device stops responding, you may need to reset it. This does not erase any of your saved data or settings.
1 Hold PWR for up to 30 seconds or until the device turns off.
2 Hold PWR for one second to turn on the device.
18 Device Information
Loading ...
Loading ...