Loading ...
Loading ...
Loading ...
Setup Overview
The first time you turn on your device, it walks you through using the windage and elevation adjustments on the
mount to set your first aim point. After you set the first aim point, you can add aim points for different distances
electronically. You can choose to calibrate your own aim points individually, or the scope can automatically
calibrate aim points out to 80 meters or 80 yards, based on the speed of your crossbow. You can add, delete, or
recalibrate aim points after completing the setup procedure.
If you auto-calibrate your aim points, you should validate your accuracy at 50 meters or 50 yards. It is especially
important to validate your accuracy if you enter the crossbow manufacturer's advertised speed.
Adjusting Windage and Elevation
The device mount includes a locking knob that prevents the mount from being adjusted unintentionally. You
must loosen the lock knob before making adjustments. You must tighten the lock knob before taking a shot to
prevent the mount from moving during use.
1 Using a 3.5 mm (
1
/
8
in.) hex wrench, loosen the lock knob.
2 Turn the dials to adjust windage or elevation .
3 Tighten the lock knob until it snaps over one time.
NOTE: Do not snap the lock knob more than once while locking the knob.
Getting Started 7
Loading ...
Loading ...
Loading ...