Loading ...
Loading ...
Loading ...
Device Alignment Settings
You can use the device alignment settings to make advanced adjustments to your device alignment. These
settings can be useful to adjust for a tilted mounting rail.
From the main menu, select > PRO SETTINGS > DEVICE ALIGNMENT.
SHIM: Displays a vertical line on the screen to help you shim the mount. You should always verify the vertical
line aligns with a plumb reference point.
TARE LEVEL: Resets the level to the zero value.
SECOND AXIS CALIBRATION: Sets options to move the aim point left or right (Calibrating the Second Axis,
page 14).
Calibrating the Second Axis
You can use the second axis calibration setting to remove any angular offsets that may be present in your
crossbow rail to scope interface.
1 Select > PRO SETTINGS > DEVICE ALIGNMENT.
2 Verify the line on the display aligns with a plumb reference point, and press OK.
TIP: If the line does not align with a plumb reference point, you should shim and level the mount before
calibrating the second axis.
3 Select SECOND AXIS CALIBRATION.
4 Follow the on-screen instructions.
Level Settings
From the main menu, select > LEVEL.
TARE: Sets the level to zero for the current angle.
AIM POINT LEVEL: Sets the angle indicator to appear with the measured aim point (Display Overview, page 9).
LEVEL GAUGE: Sets the level gauge to appear on the display. The level gauge shows the angle at which the
crossbow is tilted, in degrees.
BUBBLE LEVEL: Sets the bubble level to appear on the display. The bubble level provides a quick visual indicator
of how severely the crossbow is tilted. For best accuracy, you should always keep the bubble level centered
while shooting the crossbow.
SENSITIVITY: Sets the level sensitivity to low, medium, or high. Low sensitivity sets the tilt indicators to appear
when the crossbow is tilted five degrees or more. Medium sensitivity sets the tilt indicators to appear when
the crossbow is tilted three degrees or more. High sensitivity sets the tilt indicators to appear when the
crossbow is tilted one degree or more.
RESET TARE: Resets the level calibration to the factory default value.
Xero Location Settings
From the main menu, select > XERO LOCATIONS.
BROADCAST MODE: Sets the security of laser location broadcasting. You can select PRIVATE to send locations
only to a paired device.
FORGET DEVICE: Removes the paired device so that you may pair with another device using private mode. You
do not need to use this feature while using the public broadcast mode.
Shot Dynamics Settings
From the main menu, select > SHOT DYNAMICS.
CLEAR SESSION SHOT ODOMETER: Clears the shot history for the current session.
CLEAR TOTAL SHOT ODOMETER: Clears the entire shot history stored on the device.
14 Settings
Loading ...
Loading ...
Loading ...