Loading ...
Loading ...
Loading ...
Problem solving guide
69
Messages in the display
Message Possible cause and remedy
000 Access via a code has been activated.
Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to
appear in the display the next time the machine is
switched on.
Finish/Cooling down The laundry is cooled down at the end of the
programme.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Clean the fluff and
plinth filters. See the
operating instruction
manual for more
information.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by fluff or detergent residues.
To deactivate the message, confirm with OK.
Please see "Cleaning and care" for notes on
cleaning.
Clean the fluff filters.
Also check the plinth filter and clean it if
necessary.
You can influence when the Clean the fluff and plinth
filters. See the operating instruction manual for more
information. message lights up.
Follow the instructions in "Settings - Airways
indicator".
Fill the condensate
container with water
The condensed water container is empty. When
certain programmes are being used, water is taken
from the condensed water container and recycled.
To deactivate the message, confirm with OK.
Fill the condensed water container to at least the
―min―mark.
Please open and
close the door
After selecting the Steam care programme, you are
alerted to load laundry.
Load the laundry in the drum.
Loading ...
Loading ...
Loading ...