Loading ...
Loading ...
Loading ...
Timer
52
SmartStart
The SmartStart function (only available
in selected countries) lets you define a
time period during which your tumble
dryer will start automatically. The
appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity rate is
particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1minute and 24hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying
programme.
Setting the timeframe
If you have activated the SmartGrid
function in the settings, SmartStart or
SmartFinish will appear in the display
instead of Start at or Finish at when
you touch the Timer sensor (see
“Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for the
timer.
Set the time you want and confirm
with the OK sensor.
Touch the Start/Stop sensor to start
the drying programme with
SmartStart.
The selected programme will start
automatically, as soon as the energy
provider has sent the signal, or the
latest calculated start time has been
reached.
The procedure for changing or
deleting the SmartStartfunction is the
same as described in “Changing the
timer” and “Deleting the timer”.
Loading ...
Loading ...
Loading ...