Loading ...
Loading ...
Loading ...
Programming Guide
22
OFST,0V,HLEV,1V,LLEV,-1V,PHSE,0
Set noise bandwidth value of channel one to 100MHz
C1: BSWV BANDWIDTH, 100000000
Note:
Parameter/command
SDG800
SDG1000
SDG2000X
SDG5000
SDG1000X
<channel>
no(single
channel)
yes
yes
yes
yes
RISE
yes
no
yes
yes
yes
FAL
yes
no
yes
yes
yes
DLY
no
yes
yes
yes
yes
BANDSTATE
no
no
yes
no
no
BANDWIDTH
no
no
yes
no
no
3.5 Modulate Wave Command
DESCRIPTION
Sets or gets modulation parameters.
COMMAND
SYNTAX
<channel>:MDWV(MoDulateWaVe)<parameter>
<channel>:={C1, C2}
<parameter>:= {a parameter from the table below}
Parameters
Value
Description
STATE
<state>
Turn on or off modulation. Note: if you want
to set or read other parameters of
modulation, you must set STATE to ON at
first.
AM, SRC
<src>
AM signal source.
AM, MDSP
<mod wave shape>
AM modulation wave. Only when AM sign
al source is set to INT, you can set the
parameter.
AM, FRQ
<AM frequency>
AM frequency. Only when AM signal sour
ce is set to INT, you can set the paramet
er.
AM, DEPTH
<depth>
AM depth. Only when AM signal source is set
to INT, you can set the parameter.
DSBAM, SRC
<src>
DSBAM signal source.
DSBAM,
MDSP
<mod wave shape>
DSBAM modulation wave. Only when AM
signal source is set to INT, you can set the
parameter.
DSBAM, FRQ
<DSB-AM
DSBAM frequency. Only when AM signal
Loading ...
Loading ...
Loading ...