Loading ...
Loading ...
Loading ...
Programming Guide
18
Note:
Parameter/command
SDG800
SDG1000
SDG2000X
SDG5000
SDG1000X
CMR
yes
yes
no
yes
no
3.2 Comm_Header Command
DESCRIPTION
This command is used to change the query command returned
format. “SHORT” parameter returns short format. “LONG”
parameter returns long format. “OFF” returns nothing.
COMMAND SYNTAX
CHDR (Comm_HeaDeR) <parameter>
<parameter>:= {SHORT,LONG,OFF}
QUERY SYNTAX
CHDR (Comm_HeaDeR)?
RESPONSE FORMAT
CHDR <parameter>
EXAMPLE
Set query command format to long.
CHDR LONG
Read query command format.
CHDR?
Return:
COMM_HEADER LONG
Note:
Parameter/command
SDG800
SDG1000
SDG2000X
SDG5000
SDG1000X
CHDR
yes
yes
no
yes
no
3.3 Output Command
DESCRIPTION
Enable or disable the output of the [Output] connector at the front
panel corresponding to the channel.
The query returns “ON” or “OFF” and “LOAD”, “PLRT”
parameters.
COMMAND SYNTAX
<channel>:OUTP (OUTPut) <parameter>
<channel>:={C1, C2}
<parameter >:= {a parameter from the table below}
Parameters
Value
Description
Loading ...
Loading ...
Loading ...