Loading ...
Loading ...
Loading ...
3
ENGLISH
MAKING ESPRESSO
IMPORTANT!
If the espresso function is used for the rst time, the appliance must be
cleaned as described in the “FIRST USE” paragraph.
IMPORTANT! To prevent splashes of hot water, check that the lter holder
has been tightened until it stops before preparing the coffee. Do not
remove the lter holder while the water is owing, as the appliance is still
under pressure.
With ground coffee
The type of coffee you choose will determine the strength and taste of your espresso: the
ner your ground coffee, the more intense your espresso will be.
1. Fill the water tank with drinking water (2) and ret it on the appliance, making sure that
it is correctly in place (3).
2. Connect the device to a mains socket (4).
3. Turn on the machine by pressing On button (C) (5), On button light switches on, and
espresso buttons lights ash white (6). The machine is pre-heating. When the
temperature reaches pre-set value, espresso buttons white light will keep on.
4. Add the ground coffee to the 1 cup or 2 cups lter (F1, F2) using the measuring spoon
(K, 1 spoon = 1 measure = 1 espresso) (15, 16), then pack it using the tamper (17),
turning it using a circular motion. Once packed, the coffee measure should not exceed
the MAX level. For best quality, pack the coffee effectively. Clean off any excess coffee
from around the lter holder (18).
5. Slot the lter holder into place then turn it to the right until it stops (19).
6. Place a cup or two cups under the lter holder.
7. Press 1 espresso button or 2 espresso button (20), according to the number of
cups you want to taste (15). Selected button white light will ash, the machine starts
to make coffee (21). When coffee is done, espresso buttons white light keep on. Your
coffee is ready.
8. Unlock the lter holder by turning it to the left (22) and remove it from the appliance.
Do not touch the lter as it will be hot. Empty the lter. Remove the lter from the lter
holder.
9. Wash the lter and lter holder under running water to remove the rest of the coffee
(23).
With coffee pods
The device is compatible with all common coffee pods (F3). Note: For larger coffee pods,
we recommend using the 1 cup lter. For espresso pods, use the pod lter.
1. Insert the lter for coffee pods into the lter holder.
2. Place the pod as centrally as possible in the lter holder. Follow the instructions on the
packaging of the coffee pods for correct placement of the pod in the lter holder.
3. In order to start the brewing process, prepare the device by carrying out steps 1–3
under “With ground coffee” and press the or button.
Loading ...
Loading ...
Loading ...